| Features |
- Substantially flat frequency response from 30 to 15,000 c/s
- Extremely low (non-linear) distortion
- Exceptionally low hum pick-up
- Bi-directional (figure of eight) polar curve shape accurately
maintained in both horizontal and vertical planes
- Excellent transient response
- Natural clear balanced response to sound signal
- Body shape to enhance acoustic performance
- Clear natural high fidelity sound reproduction
- Smooth sonic textured response
|
| 4038 High Fidelity |
- Pressure gradient transducer ribbon microphone
|
| Ribbon |
- Low mass damped ribbon to control transient response
|
| Polar Response |
|
| Magnetic Fields |
- By use of hum neutralising wiring and magnetic shielding of
the toroidal ribbon to line transformer 30 to 40 dB reduction
is achieved in response to stray disturbing magnetic fields
|
| Frequency Response |
- 30 Hz to 15,000 Hz
- All microphones factory tested in free field conditions
|
| Impedance |
|
| Sensitivity |
|
| Distortion |
- Less than 1% at 125 dB SPL
|
| Connection |
- By means of 4069 3 pin jack plug. Pin 1 positive - Pin 2 negative
- Pin 3 screen
|
| Body Housing |
- Made of heavy gauge perforated brass backed by finely woven
monel mesh. Rotating hinge connection allows microphone to tilt
through 90° and turned in any direction when either suspended
or free standing
|
| Dimensions |
- 7¼" (197 mm) x 3¼" (83 mm) x (61 mm).
|
| Weight |
|
| Finish |
- Black stove enamel textured paint
|
| Packaging |
- Each microphone comes in a foam lined rigid plastic carrying
case with 4069 jack plug, and soft cloth protective bag, for safe
keeping.
|
| Accessories |
- 4071B Mic to stand adaptor with XLR
- 4069 to XLR
- 4072 Antivibration mic to stand adaptor
- Soft cloth protective bag
- Foam lined rigid plastic carrying case
|
